From the free quote to the final rinse, paver cleaning & sealing in Clearfield, UT follows a simple process: inspect, protect, clean, rinse and check.
How we clean it
When to book paver cleaning & sealing
- Weeds and moss growing in the joints
- Joint sand washed out or full of ant hills
- Faded, dull pavers
- White haze (efflorescence) on the surface
- Pavers shifting at the edges
Where the grime comes from
- Rain and washing that remove joint sand over time
- Shade and organic debris in the joints
- Salts rising out of the pavers and base
- UV fading the color
Safe steps for homeowners
- Pull weeds before they root deeply
- Top up joint sand where it's low
- Keep downspouts from pouring onto pavers
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Blasting out joint sand and loosening pavers
- Sealing over efflorescence or damp pavers, which traps a white haze
- Using the wrong sealer, which can turn cloudy or slippery
What happens on the day
- Inspect the pavers, joints and edges
- Clean the pavers and treat efflorescence if present
- Let them dry and refill joints with polymeric sand
- Activate the sand and let it set
- Apply a paver sealer suited to the look you want
How much does paver cleaning & sealing cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Local paver cleaning & sealing for Clearfield, UT
Snow, deicing salt and freeze-thaw cycles wear Utah concrete. Cleaning it in spring and sealing it in late summer helps prevent surface flaking.
Some cities in Utah limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Besides Clearfield (ZIP codes 84015, 84016 and 84089), we handle paver cleaning & sealing in Sunset (1.8 mi), Clinton (2.4 mi), Syracuse (2.5 mi) and West Point (3.1 mi). Call (555) 010-0000 for a free quote in Clearfield.
Paver Cleaning & Sealing: frequently asked questions
How much does paver cleaning & sealing cost in Clearfield, UT?
Paver Cleaning & Sealing typically costs $600-$1,800 for about 400-800 sq ft of pavers, and usually takes 1-2 days including dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for paver cleaning & sealing?
Paver Cleaning & Sealing is usually done with pressure wash, re-sand and seal, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.
Is paver cleaning & sealing safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule paver cleaning & sealing?
Clean every 1-2 years, reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.